{"title":"Animal Cutters","description":"\u003cp\u003eA collection of the cutest animals! Will make great earrings, hair clips, pushpins, fridge magnets, and more!\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"frog-lily-flower-and-lily-pad-cutter-set","title":"Frog, Lily Flower, and Lily Pad Cutter Set","description":"\u003cp\u003eA cute little frog, a cute little lily flower, and a cute little lily pad.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e \u003cbr\u003eLarge (L): Frog: 30mm; Lily Flower: 32mm; Lily Pad: 28mm\u003cbr\u003eMini (XS): Frog: 17mmmm; Lily Flower: 18mm; Lily Pad: 17mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Combo of 3","offer_id":49175881908499,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"L - Frog","offer_id":49175881941267,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Lily Pad","offer_id":49175881842963,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Lily Flower","offer_id":49175881875731,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"XS - Combo of 3","offer_id":49515483529491,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"XS - Frog","offer_id":49207922393363,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true},{"title":"XS - Lily Pad","offer_id":49515483562259,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true},{"title":"XS - Lily Flower","offer_id":49515483595027,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7399.jpg?v=1740955911"},{"product_id":"koala-cutter","title":"Koala Cutter","description":"\u003cp\u003eA cute koala and a mini version too!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 33mm\u003cbr\u003eMini (XS): 17mm\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cspan class=\"s1\"\u003e\u003c\/span\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49515638522131,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49515638554899,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7556.jpg?v=1740955896"},{"product_id":"lion-cutter","title":"Lion Cutter","description":"\u003cp\u003eA very friendly lion and its mini version cutters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 35mm\u003cbr\u003eMini (XS): 18mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49515716149523,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":54594448392467,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49515716215059,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7542.jpg?v=1740955895"},{"product_id":"monkey-cutter","title":"Monkey Cutter","description":"\u003cp\u003eA cute hanging on its tail monkey cutter, with a mini version too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cbr\u003eLarge (L): 47*27mm\u003cbr\u003eMini (XS): 17mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49515795153171,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Sets","offer_id":54594448359699,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49515795185939,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7550.jpg?v=1740955893"},{"product_id":"hedgehog-cutter","title":"Hedgehog Cutter","description":"\u003cp\u003eA cute hedgehog. Perfect addition to your Fall Collection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 30*40mm\u003cbr\u003eSmall (S): 20*25mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49515577213203,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":54594448294163,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":49515577278739,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":54594448326931,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7414.jpg?v=1740955891"},{"product_id":"armadillo-cutter","title":"Armadillo Cutter","description":"\u003cp\u003eA cute armadillo mirrored cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cbr\u003eLarge (L): 25*40mm\u003cbr\u003eSmall (S): 17*27mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49259622301971,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Set","offer_id":49200233808147,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":49200233840915,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Set","offer_id":49200233873683,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7445_40ed8160-1456-4c49-bedc-85d4dbc1f528.jpg?v=1740955888"},{"product_id":"standing-skunk-cutter","title":"Standing Skunk Cutter","description":"\u003cp\u003eA cute standing skunk family.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 35*43mm\u003cbr\u003eSmall (S): 19*29mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49516181684499,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":54594448195859,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":49516181750035,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":54594448228627,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7497.jpg?v=1740955875"},{"product_id":"raccoon-and-trash-can-cutter","title":"Raccoon and Trash Can Cutter","description":"\u003cp\u003eA raccoon - The \"Trash can Panda\" - and his trash can! Could not be any cuter than this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): Raccoon: 37mm; Trash can: 34mm\u003cbr\u003eSmall (S): Raccoon: 22mm; Trash can: 21mm\u003cbr\u003eMini (XS): Raccoon: 18mm; Trash can: 16mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Raccoon Single Cutter","offer_id":49269497921811,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Raccoon Mirrored Cutter Set","offer_id":54594448130323,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Raccoon Single Cutter","offer_id":49269497823507,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Raccoon Mirrored Cutter Set","offer_id":54594448163091,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"XS - Raccoon Cutter","offer_id":49515968069907,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true},{"title":"L - Trash Can Cutter","offer_id":49269497889043,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Trash Can Cutter","offer_id":49515968102675,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"XS - Trash Can Cutter","offer_id":49515968135443,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/0B37CD30-F46A-4983-8533-56065E5954B7.jpg?v=1740955872"},{"product_id":"sloth-cutter-set","title":"Sleeping Sloth Cutter Set","description":"\u003cp\u003eA cute sleeping sloth cutter set: a Sloth cutter, a wood log for him to hang on, and a cute little leaf cutters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e40mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Sloth only","offer_id":49293826162963,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Cutter set of 3","offer_id":49293826195731,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7432.jpg?v=1740955867"},{"product_id":"zebra-cutter","title":"Zebra Cutter","description":"\u003cp\u003eA mirrored set of cute zebra.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 39mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"Single cutter","offer_id":49311604670739,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored cutter set","offer_id":49311604703507,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7540.jpg?v=1740955862"},{"product_id":"giraffe-cutter","title":"Giraffe Cutter","description":"\u003cp\u003eA mirrored set of a cute giraffe, and a mini version for you to choose from.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSize:\u003cbr\u003e\u003c\/b\u003eLarge (L): 43mm\u003cb\u003e\u003cbr\u003e\u003c\/b\u003eMini (XS): 20mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAbout sizes:\u003cbr\u003e\u003c\/b\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAbout the cutters:\u003cbr\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003e\u003cspan\u003eProcessing and Shipping\u003c\/span\u003e\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003e\u003cspan\u003eReturn and Refund\u003c\/span\u003e\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003e\u003cspan\u003eUse and Care Instruction\u003c\/span\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!----\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49318692913427,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":49318692946195,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49339841249555,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7434_6ab429c6-18fb-4865-9b2e-38c22812684e.jpg?v=1740955860"},{"product_id":"fox-cutter","title":"Fox Cutter","description":"\u003cp\u003eA mirrored set of a cute baby fox and a mini version.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 35mm.\u003cbr\u003eMini (XS): 18mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49334699360531,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":49334699393299,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49335172170003,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7528_5280e8ea-9dd3-4f61-9fdb-7001c2212704.jpg?v=1740955857"},{"product_id":"elephant-cutter","title":"Elephant Cutter","description":"\u003cp\u003eA cute baby elephant cutter and a small version too!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 36mm\u003cbr\u003eMini (XS): 20mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003e--\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Large (L) Cutter","offer_id":49350915096851,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Small (S) Cutter","offer_id":49350886424851,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7559_19fdb275-bbab-4470-b9c7-80c984551598.jpg?v=1740955856"},{"product_id":"teddy-bear-cutter","title":"Teddy Bear Cutter","description":"\u003cp\u003eEveryone needs a teddy bear in their life!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 32mm\u003cbr\u003eMini (XS): 17mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49356464685331,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mini Cutter","offer_id":49356464718099,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7553.jpg?v=1740955855"},{"product_id":"panda-and-bamboo-cutter-set","title":"Panda and Bamboo Cutter Set","description":"\u003cp\u003eA set of a cute panda and his bamboo log; with a small version too!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L):\u003cstrong\u003e \u003c\/strong\u003ePanda: 37mm; Bamboo: 32mm\u003cbr\u003eSmall (S): Panda: 21mm; Bamboo: 21mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Panda Cutter","offer_id":49371686371603,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Bambo Cutter","offer_id":49371686404371,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Panda and Bamboo Set Cutter","offer_id":49371686437139,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Panda Cutter","offer_id":49371686469907,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Bamboo Cutter","offer_id":49515837391123,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Panda and Bamboo Set Cutter","offer_id":49515837423891,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_7531.jpg?v=1740955853"},{"product_id":"sitting-skunk-cutter","title":"Sitting Skunk Cutter","description":"\u003cp\u003eA skunk just sits there and be cute! A mirrored cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 33mm\u003cbr\u003eSmall (S): 22mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":49517244252435,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":54594447966483,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":49517244317971,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":54594447999251,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/F7ADB4E5-16E6-42AF-8B06-AC3938962B30.jpg?v=1740955850"},{"product_id":"squirrel-and-acorn-cutter","title":"Squirrel and Acorn Cutter","description":"\u003cp\u003eA favorite animal of the Fall: a Squirrel and its acorn!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e\u003cbr\u003eLarge (L): Squirrel: 36mm; Acorn: 28mm\u003cbr\u003eMini (XS): Squirrel: 19mm; Acorn: 18mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"L - Squirrel Single Cutter","offer_id":49516140364051,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Squirrel Mirrored Cutter Set","offer_id":54594447573267,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Acorn","offer_id":49516140429587,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"XS - Squirrel","offer_id":49516140462355,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true},{"title":"XS - Acorn","offer_id":49516140495123,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/35EC5E99-4770-4B9F-8DE3-08C0435ACAF9.jpg?v=1740955809"},{"product_id":"wolf-cutter","title":"Wolf Face Cutter","description":"\u003cp\u003eA cool wolf face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 40mm.\u003cbr\u003eMedium (M): 34mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807656747283,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807656780051,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/A59C0BFF-5150-4561-8F61-2A20FDDF61C9.jpg?v=1740955775"},{"product_id":"lion-face-cutter","title":"Lion Face Cutter","description":"\u003cp\u003eA cool lion face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 41mm.\u003cbr\u003eMedium (M): 35mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49831180173587,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49831180206355,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/2191B38A-D6D0-43FB-8F35-7A9A2125C167.jpg?v=1740955771"},{"product_id":"tiger-cutter","title":"Tiger Face Cutter","description":"\u003cp\u003eA cool tiger face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 39mm.\u003cbr\u003eMedium (M): 33mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807730213139,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807730245907,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/B8297075-C58F-4B81-860F-EE6298934164.jpg?v=1740955769"},{"product_id":"black-bear-cutter","title":"Black Bear Face Cutter","description":"\u003cp\u003eA cool black bear face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 39mm.\u003cbr\u003eMedium (M): 33mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807727264019,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807727296787,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/112C4ACF-38A7-4FA2-914D-25C25587D679.jpg?v=1740955768"},{"product_id":"grizzly-bear-cutter","title":"Grizzly Bear Face Cutter","description":"\u003cp\u003eAn angry grizzly bear face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 40mm.\u003cbr\u003eMedium (M): 34mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807713206547,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807713239315,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/85A45AE8-6719-4BAC-A162-42A435AED209.jpg?v=1740955767"},{"product_id":"leopard-cutter","title":"Leopard Face Cutter","description":"\u003cp\u003eA cool leopard face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 40mm.\u003cbr\u003eMedium (M): 33mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807725297939,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807725330707,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/EA8A0DBF-B2D9-4B3A-8C7D-C38BB5D288A9.jpg?v=1740955765"},{"product_id":"cougar-cutter","title":"Cougar Face Cutter","description":"\u003cp\u003eA cool cougar face cutter with details!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 40mm.\u003cbr\u003eMedium (M): 34mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807669231891,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807669264659,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/5E7A4288-320C-4785-A197-4134D259334A.jpg?v=1740955764"},{"product_id":"mustang-cutter","title":"Mustang Face Cutter","description":"\u003cp\u003eA cool mustang face mirrored cutter set!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e35mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Single Cutter","offer_id":49777521131795,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Cutter Set","offer_id":49777521164563,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/93A28DDE-0CEC-4911-BF24-6B4C936245FD.jpg?v=1740955763"},{"product_id":"the-cool-face-combo","title":"The Cool Face Cutter Combo","description":"\u003cp\u003eA combo set of cool faces: a wolf, a lion, a tiger, a cougar, a leopard, a black bear, a grizzly bear, a mustang. Available in two sizes for you to choose from.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 42mm\u003cbr\u003eMedium (M): 34mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter","offer_id":49807588589843,"sku":null,"price":31.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":49807588622611,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/FE63D7D4-4269-4135-9C3E-5249D0178550.jpg?v=1740955761"},{"product_id":"autumn-foxy-cutter","title":"Autumn Foxy Cutter","description":"\u003cp\u003eA mirrored set of a cute baby fox sitting with his tail wrapping around.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e30mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Single Cutter","offer_id":49821454270739,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Cutter Set","offer_id":49821454303507,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/E73B342A-DC7C-4A5E-B78D-AF20E864629B.jpg?v=1740955736"},{"product_id":"axolotl-cutter","title":"Axolotl Cutter","description":"\u003cp\u003eA cute little Axolotl holding a tiny heart cutter set!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e30mm\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Single Cutter","offer_id":50299692351763,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Cutter Set","offer_id":50299692384531,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/7D2E53E6-D3AA-4B10-9304-EC136E0E2FBB.jpg?v=1740955476"},{"product_id":"sitting-axolotl-cutter","title":"Sitting Axolotl Cutter","description":"\u003cp\u003eA cute little Axolotl holding a tiny heart cutter set!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e30mm\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50299757134099,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/7D91C390-18BD-4BA8-8CA2-88F6E370EF48.jpg?v=1740955475"},{"product_id":"chameleon-cutter","title":"Chameleon Cutter","description":"\u003cp\u003eA mirrored set of a cute chameleon!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e32*26mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Mirrored Cutter Set","offer_id":51543204954387,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Single Cutter","offer_id":51543204921619,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0057.jpg?v=1746329895"},{"product_id":"baby-elephant-cutter","title":"Baby Elephant Cutter","description":"\u003cp\u003eThe cutest little baby elephant cutter. 3 sizes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 31mm\u003cbr\u003eSmall (S): 26mm\u003cbr\u003eMini (XS): 15mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003e--\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"XS - Mirrored Cutter Set","offer_id":51641679020307,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"XS - Single Cutter","offer_id":51641679053075,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51641679085843,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51641679118611,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":51641534152979,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51641534185747,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0100.jpg?v=1746857022"},{"product_id":"tyrannosaurus-rex-cutter","title":"Dinosaur: Tyrannosaurus Rex Cutter","description":"\u003cp\u003eA mirrored set of a cute T-Rex cutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"S - Single Cutter","offer_id":51873962197267,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51873962164499,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51873746387219,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":51873746354451,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0397.jpg?v=1749009265"},{"product_id":"dinosaur-pterodactyl-cutter","title":"Dinosaur: Pterodactyl Cutter","description":"\u003cp\u003eA mirrored set of a cute Pterodactyl cutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Mirrored Cutter Set","offer_id":51874002075923,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51874002108691,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51874002141459,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51874002174227,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0393.jpg?v=1749009265"},{"product_id":"dinosaur-stegosaurus-cutter","title":"Dinosaur: Stegosaurus Cutter","description":"\u003cp\u003eA mirrored set of a cute Stegosaurus cutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Mirrored Cutter Set","offer_id":51874012135699,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51874012168467,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51874012201235,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51874012234003,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0402.jpg?v=1749009266"},{"product_id":"dinosaur-triceratops-cutter","title":"Dinosaur: Triceratops Cutter","description":"\u003cp\u003eA mirrored set of a cute Triceratops cutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Mirrored Cutter Set","offer_id":51874017280275,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51874017313043,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51874017345811,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51874017378579,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0405.jpg?v=1749009259"},{"product_id":"dinosaur-brontosaurus-cutter","title":"Dinosaur: Brontosaurus Cutter","description":"\u003cp\u003eA mirrored set of a cute Brontosaurus cutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Mirrored Cutter Set","offer_id":51874022228243,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51874022261011,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51874022293779,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51874022326547,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0388.jpg?v=1749009266"},{"product_id":"dinosaur-plesiosaurus-cutter","title":"Dinosaur: Plesiosaurus Cutter","description":"\u003cp\u003eA mirrored set of a cute\u003cspan\u003ePlesiosaurus\u003c\/span\u003ecutter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eLarge Cutter (L): 28mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSmall Cutter (S): 18mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Mirrored Cutter Set","offer_id":51874028421395,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":51874028454163,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Mirrored Cutter Set","offer_id":51874028486931,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"S - Single Cutter","offer_id":51874028519699,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0384.jpg?v=1749009257"},{"product_id":"emotional-little-frog-cutter-set","title":"Emotional Little Frog Cutter Set","description":"\u003cp\u003eSet of 07 different cute little frog face cutters with different face expressions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e14mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"Set of 7","offer_id":51918795178259,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Happy","offer_id":51918795211027,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Sad","offer_id":51918795243795,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Angry","offer_id":51918795276563,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Duh","offer_id":51918795309331,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Cute","offer_id":51918795342099,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Love","offer_id":51918795374867,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"Bruh","offer_id":51918795407635,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0469.jpg?v=1749744372"},{"product_id":"fawn-cutter","title":"Fawn Cutter","description":"\u003cp\u003eA cute little fawn cutter! Craft adorable woodland-themed earrings and charms with this Fawn Polymer Clay Cutter Ð perfect for nature-inspired designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 30mm\u003cbr\u003eMini (XS): 18mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003e--\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Single Cutter","offer_id":52063388762387,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":52063388795155,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"XS - Single Cutter","offer_id":52063388827923,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"XS - Mirrored Cutter Set","offer_id":52063388860691,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0684.jpg?v=1752373252"},{"product_id":"meerkat-cutter","title":"Meerkat Cutter","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eAdd charm and personality to your clay creations with our \u003c\/span\u003e\u003cstrong data-end=\"215\" data-start=\"184\"\u003eMeerkat Polymer Clay Cutter\u003c\/strong\u003e\u003cspan\u003e. Featuring the iconic upright meerkat pose, this cutter is perfect for animal lovers, safari-themed collections, kids' jewelry, and playful statement earrings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge (L): 44mm\u003cbr\u003eMedium (M): 32mm\u003cbr\u003eSmall (XS): 15mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003e--\u003cspan class=\"s1\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"M - Mirrored Cutter Set","offer_id":52737560051987,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"M - Single Cutter","offer_id":52737564639507,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"L - Mirrored Cutter Set","offer_id":52737560117523,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"L - Single Cutter","offer_id":52737560150291,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"S - Small Cutter","offer_id":52737560084755,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/meerkat_cutter_medium_size.jpg?v=1764201483"},{"product_id":"jimothy-the-raccoon-cutter","title":"Jimothy - The Raccoon Cutter","description":"\u003cp\u003eJimothy - The Legend Raccoon! Could not be any cuter than this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eEarring size: 30mm\u003cbr\u003eKeychain: 40mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"Sol Corner","offers":[{"title":"Earring Size - Single Cutter","offer_id":54518549250323,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Earring Size - Mirrored Cutter Set","offer_id":54519986946323,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Keychain Cutter","offer_id":54518549283091,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Combo of All","offer_id":54518549315859,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/jimothy_6.jpg?v=1785639425"},{"product_id":"platypus-cutter","title":"Platypus Cutter","description":"\u003cp\u003eA mammal that lays eggs! So fascinating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e33mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Single Cutter","offer_id":54524389130515,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Cutter Set","offer_id":54594441216275,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/platypus_2.jpg?v=1786254800"},{"product_id":"bear-paw-print-cutter","title":"Bear Paw Print Cutter","description":"\u003cp\u003eA cool bear paw print imprint cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e26mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, there might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.com\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.com\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.com\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":54575714664723,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/bear_paw_print_earrings.jpg?v=1786939093"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/collections\/E101040B-675F-4AE5-969D-77FFB00112C1.jpg?v=1721007226","url":"https:\/\/solcorner.com\/collections\/animal-cutters.oembed?page=3","provider":"Sol Corner","version":"1.0","type":"link"}