{"title":"Basic","description":"\u003cp\u003eAll basic organic shape cutters you need!\u003c\/p\u003e","products":[{"product_id":"basic-stud-cutter-set","title":"Basic Stud Cutter Set","description":"\u003cp\u003eFive styles of stud earring cutters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e18mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\" data-mce-href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\" data-mce-href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\" data-mce-href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\" data-mce-href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":49512601518355,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/65D85FAF-869A-45B6-A0BD-056D7735A6F2.jpg?v=1740955796"},{"product_id":"spiral-dangle-cutter","title":"Spiral Dangle Cutter","description":"\u003cp\u003eFour different styles of spiral dangle cutters, you will love these: Round, Square, Triangle, and Oval.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eRound: 34mm\u003cbr\u003eOval: 38mm\u003cbr\u003eSquare: 26mm side to side, 38mm from one corner to opposite corner.\u003cbr\u003eTriangle: 38mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Bundle of Four Sets","offer_id":49959362887955,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Round Set Cutter","offer_id":49959362756883,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Oval Set Cutter","offer_id":49959362789651,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Square Set Cutter","offer_id":49959362822419,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Triangle Set Cutter","offer_id":49959362855187,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/92E46B4A-18F9-4FE2-96FF-8E36EB2EC58E.jpg?v=1740955686"},{"product_id":"leaf-shape-dangle-cutter","title":"Leaf Shape Dangle Cutter","description":"\u003cp\u003eThree different styles of a leaf shape dangle!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e36mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Bundle of 4 Cutters","offer_id":49959435010323,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Cut-out Cutter","offer_id":49959435043091,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Embossed-lines Cutter","offer_id":49959435075859,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Inner Cutout Set Cutter","offer_id":49959435108627,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/D36DCAD9-A5B9-4351-B42C-8DC51D8EF0EE.jpg?v=1740955684"},{"product_id":"basic-shape-cutter-set","title":"Basic Shape Cutter Set","description":"\u003cp\u003eFour beautiful shape cutter sets. Make beautiful dangle earrings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e35mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Bundle of Everything","offer_id":52446008377619,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Diamond Shape Cutter Set","offer_id":52446008410387,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Triangle Shape Cutter Set","offer_id":52446008443155,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Long Teardrop Shape Cutter Set","offer_id":52446008475923,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Teardrop Shape Cutter Set","offer_id":52446008508691,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/4E4476DC-3BC7-4269-96A1-556CF2930AB4.jpg?v=1740955635"},{"product_id":"basic-outline-shape-cutter","title":"Basic Outline Shape Cutter","description":"\u003cp\u003eFive beautiful outline shape cutter sets. Make beautiful dangle earrings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e 35mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Combo of everything","offer_id":52445981049107,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Hexagon Outline Shape Cutter","offer_id":52445981081875,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Rectangle Outline Shape Cutter","offer_id":52445981114643,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Teardrop Outline Shape Cutter","offer_id":52445981147411,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Triangle Outline Shape Cutter","offer_id":52445981180179,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Diamond Outline Shape Cutter","offer_id":52445981212947,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/BCD2B16D-3FA8-4B16-9AF6-FF5564B8206E.jpg?v=1740955633"},{"product_id":"apollo-dangle-earring-cutter-set","title":"Apollo Dangle Earring Cutter Set","description":"\u003cp\u003eFour-piece set. Make beautiful dangle earrings. \u003cmeta charset=\"utf-8\"\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eMiddle piece: 30mm\u003cbr\u003eLong bottom piece: 31mm\u003cbr\u003eTop piece: 14mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50126592704787,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/8B0CB6BF-EAA7-4288-97A2-46365A97A0DE.jpg?v=1740955609"},{"product_id":"leela-dangle-earring-cutter-set","title":"Leela Dangle Earring Cutter Set","description":"\u003cp\u003eFour-piece set. Make beautiful dangle earrings. \u003cmeta charset=\"utf-8\"\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eTop: 14mm (~0.55 inches)\u003cbr\u003eMiddle pieces: 15*30mm (0.6*1.2 inches) each.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50126638448915,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/FullSizeRender_913391a6-6c0c-4bca-b9a3-764a017cd32b.jpg?v=1740955607"},{"product_id":"aurora-dangle-earring-cutter-set","title":"Aurora Dangle Earring Cutter Set","description":"\u003cp\u003eFour-piece set. Make beautiful dangle earrings. \u003cmeta charset=\"utf-8\"\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eMain piece: 36mm (~1.4 inches)\u003cbr\u003eDiamond piece: 12mm (~ 0.5 inches)\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50126644248851,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/AC3DE86A-F6AA-4212-9DAA-8116F59790D3.jpg?v=1740955605"},{"product_id":"ruby-dangle-earring-cutter-set","title":"Ruby Dangle Earring Cutter Set","description":"\u003cp\u003eTwo-piece set. Make beautiful dangle earrings. Come with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eTop: 12mm (~0.5 inches)\u003cbr\u003eBottom: 32mm (~1.25 inches)\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50126644674835,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/ED196AA4-FA1A-4991-9DB1-B309CC70AA13.jpg?v=1740955604"},{"product_id":"round-with-oval-cut-out-cutter","title":"Round with Oval Cut-out Cutter","description":"\u003cp\u003eMake beautiful dangle earrings. Come with drill guide!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e30mm (~1.2 inches)\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50126647132435,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/8726C263-677E-4CAF-81A7-E30FC864759F.jpg?v=1740955601"},{"product_id":"hera-cutter","title":"Hera Cutter","description":"\u003cp\u003eUnique, organic shape cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e40mm (~ 1.6 inches)\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Single Cutter","offer_id":50126700183827,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true},{"title":"Mirrored Set Cutter","offer_id":50126700216595,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/EAB458E2-07A2-4FE2-AFDA-E030FBC7B8D2.jpg?v=1740955600"},{"product_id":"chelsea-cutter","title":"Chelsea Cutter","description":"\u003cp\u003eUnique, organic shape cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eTop: 9mm (~ 0.35 inches)\u003cbr\u003eBottom: 34mm40mm (~ 1.3 inches)\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50163811844371,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/C3006391-DD32-4AA4-A667-1B6C8035FA8E.jpg?v=1740955569"},{"product_id":"leaf-drop-dangle-cutter-set","title":"Leaf Drop Dangle Cutter Set","description":"\u003cp\u003eA set of five cutters to make the best leaf drop shape dangle earring. You can select the set with or without guides.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize \u003c\/strong\u003e(approx. overall):\u003cbr\u003eLarge Set (L): 3 inches\u003cbr\u003eMedium Set (M): 2.6 inches\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Set with Guides","offer_id":50180435312915,"sku":null,"price":11.0,"currency_code":"USD","in_stock":true},{"title":"L - Large Set without Guides","offer_id":50180435345683,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Set without Guides","offer_id":50180435378451,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/1F48210C-811E-429D-952F-74D00E77F282.jpg?v=1740955539"},{"product_id":"spring-dangle-earring-cutter-set","title":"Spring Dangle Earring Cutter Set","description":"\u003cp\u003eThree-piece sets. Make beautiful dangle earrings. Two sizes.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge Set: overall about 3 inches. Middle piece: 30mm\u003cbr\u003eSmall Set: overall about 2 inches. Middle piece: 20mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Set Cutter","offer_id":50254628356371,"sku":null,"price":7.5,"currency_code":"USD","in_stock":true},{"title":"S - Small Set Cutter","offer_id":50254628389139,"sku":null,"price":5.5,"currency_code":"USD","in_stock":true},{"title":"Combo of Two Set","offer_id":50254633042195,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/F6C6E2DC-0E91-4F1B-87DB-69AE0ADC8A60.jpg?v=1740955498"},{"product_id":"three-piece-dangle-set","title":"Three Piece Dangle Cutter Set","description":"\u003cp\u003eSet of three small cutters, help you make unique dangle earrings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e16mm-17mm-17mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Combo of Both Sets","offer_id":50557655253267,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"Solid Set","offer_id":50557655286035,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Cut-out Set","offer_id":50557655318803,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/C7B68216-3157-490A-ACA2-4A360A15C4A5.jpg?v=1740955411"},{"product_id":"aztec-dangle-earring-cutter-set","title":"Aztec Dangle Earring Cutter Set #1","description":"\u003cp\u003eFour-piece set. Make beautiful dangle earrings.\u003cbr\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e13mm-25mm-22mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50591995298067,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_3452.jpg?v=1740959534"},{"product_id":"aztec-dangle-earring-cutter-set-2","title":"Aztec Dangle Earring Cutter Set #2","description":"\u003cp\u003eTwo-piece set. Make beautiful dangle earrings.\u003cbr\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e35mm-27mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50592014893331,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_9531.jpg?v=1740953103"},{"product_id":"chloe-dangle-earring-cutter-set","title":"Chloe Dangle Earring Cutter Set","description":"\u003cp\u003eThree-piece set. Make beautiful dangle earrings.\u003cbr\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e13mm-19mm-22mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50592029442323,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_9529.jpg?v=1740953098"},{"product_id":"embossed-sun-wheel-cutter","title":"Embossed Sun Wheel Cutter","description":"\u003cp\u003eUnique, special embossed detail round cutter. Make beautiful dangle earrings.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e32mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50592045465875,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_9525.jpg?v=1740953103"},{"product_id":"aztec-dangle-earring-cutter-set-3","title":"Aztec Dangle Earring Cutter Set #3","description":"\u003cp\u003eThree-piece set. Make beautiful dangle earrings.\u003cbr\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e35mm-27mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"L - Large Cutter Set","offer_id":50616451629331,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"S -  Small Cutter Set","offer_id":50616451662099,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true},{"title":"Combo of Both Sets","offer_id":50616451694867,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_3525.jpg?v=1741227144"},{"product_id":"dangle-earring-cutter-set","title":"Dangle Earring Cutter Set","description":"\u003cp\u003eThree-piece set. Make beautiful dangle earrings.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eCome with drill hole guide to make your life easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eTop:\u003cbr\u003eMiddle pieces: 15*30mm (0.6*1.2 inches) each.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":50616473518355,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_9570.jpg?v=1741227143"},{"product_id":"button-stud-cutter-set","title":"Button Stud Cutter Set","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eMini stud earring cutter set featuring two styles of five classic shapes – perfect for creating button-style polymer clay earrings with precision and ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e13mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Bundle of 10 Cutters","offer_id":51641921110291,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true},{"title":"Basic Shape Set","offer_id":51641921143059,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Embossed Line Set","offer_id":51641921175827,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0111.jpg?v=1746857039"},{"product_id":"jenny-dangle-earring-cutter-set","title":"Jenny Dangle Cutter Set","description":"\u003cp\u003eBezel style dangle earring cutter set. Simple yet make beautiful dangle earrings.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eBottom piece: 30mm\u003cbr\u003eTop piece: 28mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":51874032091411,"sku":null,"price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0380.jpg?v=1759587585"},{"product_id":"sol-dangle-earring-cutter-set","title":"Sol Dangle Earring Cutter Set","description":"\u003cp\u003eSimple yet make beautiful dangle earrings. Daily wear earring cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eBottom piece: 31mm\u003cbr\u003eTop piece: 13mm\u003cbr\u003eMiddle piece: 17mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":51947107156243,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0543.jpg?v=1750394134"},{"product_id":"drop-diamond-dangle-earring-cutter-set","title":"Drop Diamond Dangle Earring Cutter Set","description":"\u003cp\u003eThin cutout style. Drop diamond shapes. Simple yet make beautiful dangle earrings. Daily wear earring cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e30-38-50mm. 2mm thick cutout.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":51947118887187,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0540.jpg?v=1750394134"},{"product_id":"three-piece-drop-dangle-earring-cutter-set","title":"Three Piece Drop Dangle Earring Cutter Set","description":"\u003cp\u003eThree Piece Dangle Set. Simple yet make beautiful dangle earrings. Daily wear earring cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e12-12-23mm.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":51969914536211,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0597.jpg?v=1751078478"},{"product_id":"oval-cutout-cutter","title":"Oval Cutout Cutter","description":"\u003cp\u003eThin cutout style. Oval shapes. Simple yet make beautiful dangle earrings. Daily wear earring cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eLarge Cutter (L): 34mm\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eMedium Cutter (M): 25mm\u003cbr\u003eSmall Cutter (S): 16mm2mm thick cutout.\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"S - Small Cutter","offer_id":51970285371667,"sku":null,"price":2.0,"currency_code":"USD","in_stock":true},{"title":"M - Medium Cutter","offer_id":51970285338899,"sku":null,"price":2.5,"currency_code":"USD","in_stock":true},{"title":"L - Large Cutter","offer_id":51970285306131,"sku":null,"price":3.0,"currency_code":"USD","in_stock":true},{"title":"Combo of Three Cutters","offer_id":51970285404435,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0600.jpg?v=1751078480"},{"product_id":"round-dangle-cutter-set","title":"Round Dangle Cutter Set","description":"\u003cp\u003eMake beautiful dangle earrings. Come with drill guide!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e30mm diameter\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52104592064787,"sku":null,"price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0760.jpg?v=1753330064"},{"product_id":"daisy-burst-circle-cutter","title":"Daisy Burst Circle Cutter","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eCreate beautiful floral earrings and charms with this D\u003c\/span\u003eaisy burst circle polymer clay cutter. Durable and precise, perfect for daisy-inspired jewelry, keychains, and craft projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e30mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52341883044115,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0790.jpg?v=1757817492"},{"product_id":"star-burst-circle-cutter","title":"Star Burst Circle Cutter","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eDesign stunning celestial earrings and charms with this S\u003c\/span\u003etar burst circle polymer clay cutter\u003cspan\u003e. Durable and precise, perfect for star-themed jewelry, keychains, and craft projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e30mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52341883797779,"sku":null,"price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0787.jpg?v=1757817492"},{"product_id":"leaf-wreath-circle-cutter","title":"Leaf Wreath Circle Cutter","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eCreate elegant nature-inspired earrings and charms with this L\u003c\/span\u003eeaf wreath circle polymer clay cutter\u003cspan\u003e. Durable and precise, perfect for botanical jewelry, keychains, and craft projects.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003c\/strong\u003e32mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52341939077395,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/IMG_0792.jpg?v=1757817501"},{"product_id":"scallop-oval-cutter","title":"Scallop Oval Cutter","description":"\u003cp\u003eOval shape with scalloped outline. Simple yet beautiful. Daily wear earring cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e40mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52908035834131,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/scallop_2.jpg?v=1768018051"},{"product_id":"lizzy-dangle-cutter-set","title":"Lizzy Dangle Cutter Set","description":"\u003cp\u003eDangle earring cutter set. Simple yet make beautiful dangle earrings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize:\u003cbr\u003e\u003c\/strong\u003eBottom piece: 38mm\u003cbr\u003eTop piece: 14mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Style #1 Set","offer_id":52908059296019,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Style #2 Set","offer_id":52908059328787,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/dangle_1.jpg?v=1768019606"},{"product_id":"scallop-ellipse-dangle-cutter-set","title":"Scallop Ellipse Dangle Cutter Set","description":"\u003cp\u003eEllipse shape with scalloped outline. Simple yet beautiful. Daily wear earring cutter set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003eBottom: 28mm; Top: 12mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":52946031902995,"sku":null,"price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/Elipse_2.jpg?v=1768957459"},{"product_id":"old-fashion-dangle-cutter-set","title":"Old-fashion Dangle Cutter Set","description":"\u003cp\u003eOval shape with scalloped outline. Simple yet beautiful. Daily wear earring cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e40mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Combo of Everything","offer_id":52948027703571,"sku":null,"price":15.0,"currency_code":"USD","in_stock":true},{"title":"Style 01 - Wave","offer_id":52948027736339,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Style 02 - Line","offer_id":52948027769107,"sku":null,"price":7.0,"currency_code":"USD","in_stock":true},{"title":"Style 03 - Blank","offer_id":52948027801875,"sku":null,"price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/Dangle_2_911596fd-31fb-4859-93d3-58bb007460b2.jpg?v=1768957461"},{"product_id":"droplet-dangle-cutter-set","title":"Droplet Dangle Cutter Set","description":"\u003cp\u003eDroplet Dangle Cutter Set. Simple yet beautiful. Daily wear earring cutter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e40mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Combo of Everything","offer_id":53710674329875,"sku":null,"price":8.0,"currency_code":"USD","in_stock":true},{"title":"Style 01 Cutter Set","offer_id":53710674362643,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true},{"title":"Style 02 Cutter Set","offer_id":53710674395411,"sku":null,"price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/droplet_dangle_1.jpg?v=1770416354"},{"product_id":"basic-charm-cutter-set","title":"Basic Charm Cutter Set","description":"\u003cp\u003eBasic charm cutter set: They are tall cutter for thicker clay, five different shapes: circle, oval, diamond, flower, scalloped circle. You get a free cute little dragonfly stamp when purchase the set.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003e12-13mm\u003cbr\u003eCutting edge: 0.22mm for the cleanest cut.\u003c\/p\u003e\n\u003cp\u003eThis polymer clay cutter is designed for clean cuts for earrings, pendants, and other handmade clay pieces.\u003c\/p\u003e\n\u003cp\u003e--\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout sizes:\u003cbr\u003e\u003c\/strong\u003eSizes mentioned in the description are measured from top to bottom of the inner side of the cutters when put in the normal position like in the pictures (unless noted otherwise). I have a quarter coin included in the pictures as a reference, please check carefully. Personally, I find that the Large (L) size is suitable for large dangle earrings, fridge magnets, keychains, ... The Small (S) size suits small dangle earrings, large stud earrings, pushpins, ... The Mini (XS) size is suitable for small stud earrings, or for putting on a bigger slab base to cut out for different things. Again, this is a totally personal preference - just sharing. If you want any different sizes of any cutter, please just send me a message, and I will see what I can do to accommodate you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout the cutters:\u003cbr\u003e\u003c\/strong\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e are 3D printed using biodegradable environmentally friendly PLA plastic. They will come in a random color - blue, green, white, pink, black, ... Rumor has it that PLA cutters could not be sharp, you will find that is false information when you use my cutters - they have 0.22mm cutting edges. And I like the thought that I am being considerate of the environment by choosing not to use resin to make cutters.\u003cbr\u003eEven though, PLA is confirmed non-toxic, do not let your pets eat the cutters. Also, PLA breaks when exposed to high temperatures, please avoid leaving them in the sun or in your car outside, and definitely do not put them in the oven. Not dishwasher safe. Do not soak them in or wash them under hot water. Do not soak them in alcohol or acetone or gasoline or chicken soup - chicken soup is for the soul, not for cutters.\u003cbr\u003eHere and there, might be an imperfection on the cutters due to the nature of 3D printing, but it will not affect the quality.\u003cbr\u003e\u003cb\u003eSol Cutters\u003c\/b\u003e often look cute, but definitely not toys, so not suitable for kids of any age.\u003c\/p\u003e\n\u003cp\u003eFor more information about:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/solcorner.net\/pages\/custom-cutter\"\u003eCustom Cutters\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eA Little More about \u003ca href=\"https:\/\/solcorner.net\/pages\/processing-time-and-shipping\"\u003eProcessing and Shipping\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/return-and-refund\"\u003eReturn and Refund\u003c\/a\u003e, \u003ca href=\"https:\/\/solcorner.net\/pages\/use-and-care-instruction\"\u003eUse and Care Instruction\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sol Corner","offers":[{"title":"Default Title","offer_id":53876729282835,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/files\/charms_2.jpg?v=1772147783"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0882\/4058\/7027\/collections\/FullSizeRender_105fc4b4-2b3f-4cc4-b49b-5a919e860e75.jpg?v=1740959654","url":"https:\/\/solcorner.com\/collections\/basic-cutters.oembed?page=3","provider":"Sol Corner","version":"1.0","type":"link"}